Description :
Super seal Latex ( SL-90) is a highly rubberized bitumen emulsion, which dries to tough flexible waterproof membrane for protection coating.
Application:
Super seal Latex SL-90 is a relatively high viscosity liquid designed to seek low spot, void and hairline cracks, sealing then with
flexible, elastic membrane Super seal Latex SL-90 seal and waterproofs roofing concrete ) above and underground ) metal wood
and pavement Super seal Latex SL-90 fills many needs for sealing, waterproofing isolation moisture barrier and bonding needs can
be used for cracks filling asphalt pavements after mixing with sand and fine aggregate, with a crack width not less than 3 mm 8mm passing sieve no 16 ( 1,18mm) for SL-90 (low viscosity) and 8mm – 19mm passing sieve no 8(2,36mm) for SL-90 ( high viscosity)
as a joint sealant vertical, horizontal crack sealant
so that super seal SL-90 suitable for waterproofing water tank & baths & kitchen& swimming pool, also provide protection coating for curves and sloping roof.
Advantages:
• Simple easy application
• Non flammable. Non-toxic, Non-corrosive.
• Resist almost all water bome chemical and contaminants Harmless to the environment
• Excellent adhesive to most clean surfaces
• Dry to tough film
• High coverage rate
• Homogenous emulsion
Application Instruction:
• Clean the surface to be sealed with SL-90, remove all dust, scale, oil etc…. before application
• Moisten (dampen) the surface with water before SL-90 coat.
• Apply with brush, roller, spry, etc. may be diluted with clean water for workable consistency
• For porous surfaces prime coat with 50% water diluted SL-90
• Apply second coat full strength after prime coat
Benefits:
• Reduce temperature susceptibility
• Reduce rutting and raveling
• Reduce cracking
• Harmful to the environment
- Increase fatigue lite
• Increase service life
• Lower life-cycle
• Non flammable
Specification and physical feature :
• Wet- chocolate brown dry – Black
• Safety non-flammable, non-toxic, non-odorous
• Viscosity Brookfield spindle fout@20rpm,60to 100 cp - Adhesion bonds to clean asphalt, wood, metal
• Percent non-volatile dry extra) at 100 oC: 60%
• Blend ability mixes easily cement gravel, etc…
• Latex in dry extract 3%
• Dampen material with water the add SL-90
• Chemical 1%
• Stability, not affected by long-time storage or transport
• Water 36%
• Storage Limits subject to freezing-store above 50 C
• Elongation 300%
• Drying time prime coat 30 minutes seal Coat two hours
• Durability resistant to high and low temperature 30 oC (-22 of) to 80 oC (176 Of)
Estimating : 20 & 200 Liter drum
Coverage : 1,5 to 2 m2/Liter
Health and Safety : SL-90 contain bitumen material so wear protective clothes &eye/face protection gloves should accidental skin or eyes contact must use clean water and seek medical advice and take the packing with you to clinic.
SL-90 comply with:
ASTMD3747 – ASTMD244 – BS8102 – ASTMD2939 – ASTMD1187