DESCRIPTION:
Asphalt (bitumen) emulsion SS-1H sutable suspension of hard asphalt (bitumen) in fluid matrix, which pours like water.
• Color Wet – dark brown, Dry – black • Dry Extract: 60%
• Specific Gravity 1,0
•Service temperature limit: -30 oC to 65 oC (-22 of to 149 of)
• Heat flow resistance Does not sag or flow @65 oC (149 of)
• Miscibility: Mixes in all proportions with cement and aggregate Dilute with cool clean water for application as esired.
• Solubility of cleaning of tools: Wet- with cool water, Dry all petroliums solvents.
• Stability of storage: Not affected by normal transport or long-time storage.
•Storage recommendations: Subject to damage by freezing below 0 oC (32 of).
Safety: Non-flammable before and after application Flash point of residual: 175 oC (347 of)
Does not sustain fire, no flow at high temperature, Non-toxic, does not transmit taste, odor or color to product in contact.
• Resistance: Highly resistant to weathering and temperature variations Excellent almost any clean surface
Uses :
• General Construction Slurry sealing, sealing. Protective coating, adhesive, moisture
barrier, soll, stabilization
•Civil Engineering Pavement construction and maintenance, parking lots waterproofing of dams, canals and concrete, tacking, sealing and slurry sealing in Paving construction.
Protection:
Vapor and moisture barrier, corrosion preventive, sealing membrane between aterials .
Insulation: Adhesive, vapors and gases barrier, sealant and protection for insulation
. For use in pavement Construction, Fog Seal, Tack Coat, Prime Coat penetrable surface
Dust Binder, Mulch Treatment, Crack Filler, Weather Proofing.
Application: May be brushed or sprayed in any concentration. Dilute with clean water .
(Graco airless spray equipment recommended – contact information on request.)
• For paving: Contact Al Majd Asphalt Emulsion Factory for equipment and use details.
• Drying time:
Prime coat 0,3 kg/m2
Porous surface 0,5 hour Non-porous surface 1 to 2 hour
Waterproofing 0.5 kg/m2 1 to 2 hour
Containers: Metal drums 200 liters, Metal cans: 20 liter, or in bulk quantities as desired